Features CFM Room Circulation: 265 Chassis Type: Thru the Wall Control Type: Digital Cooling Capacity (BTU): 9200 Energy Efficiency Rating: 9.8 Heat: Electric Heat Heating Capacity (BTU): 11000 Maximum Cooling Amps: 4.4 Maximum Cooling Watts: 940 Maximum Heating Amps: 15.0 Maximum Heating Watts: 3500 PTAC: No Remote Control Included: Yes Type: Wall Wall Sleeve Included: No
Technical Details ADA Compliant: No Energy Star Rated: Yes Plug Type: 6-20P Voltage: 230/208 Volts
Items identified as Quick Ship will ship within 2 business days from our warehouse in Babylon, New York. Actual delivery times will vary based on your location. If you are ordering multiple items and not all items qualify for Quick Ship, the order will ship when all items are available to ship. Quick Ship may not apply to multiple quantities of the same product.
9,200 BTU Through-the-Wall Air Conditioner with 11,000 BTU Electric Heat, 265 CFM, Electronic Touchpad, Remote Control, 9.8 Energy Efficiency Ratio and Energy Star Rated
This item is unavailable at this time but we may have a similar model. Please call 1-877-957-5377 and speak to a sales associate
The PBE093E35AXAA has a 4-way adjustable airflow to allow for cooling or heating to any part of the room and a high energy-efficiency that saves you money when compared to other competition models. It also features an easy removable condensor top that allows for quick and complete cleaning of outdoor coils. This access for cleaning the outdoor coil enables easy removal of dirt and debris to dramatically lengthen the life of the compressor and other sealed system components. Six easy access screws and let the cleaning begin! Not available on competitor models.
How to Choose a Room Air Conditioner
Compared to large capacity central units, room air conditioners have several advantages. The initial cost of a room air conditioning unit is significantly lower than the cost of central air. Because room air conditioners are designed for cooling small spaces, operating costs are reduced. And, room air conditioners can provide personalized temperature and humidity controls that central systems cannot.
Calculating Cooling Capacity
Cooling capacity is the critical factor in properly selecting a room air conditioner. Cooling capacity is measured in British Thermal Units (BTUs) and typical models will range in capacity from 5,000 BTUs to 28,500 BTUs.
Choosing an undersized unit will overwork the unit and it will not cool properly. Choosing an oversized unit will cost more to buy and operate and it will not dehumidify properly.
We can help you to calculate capacity. Be prepared to provide specific information on:
A simple floor plan to show the location of doors and north-facing windows
The number of people it will serve
Sources of heat such as lamps, TV and appliances
An explanation of what's above the intended room
Your insulation provisions
Cooling Capacity by Room Size
Measure the length and width of the area to be cooled. Multiply the length by the width to determine square footage or square meters. When cooling rooms with uninsulated ceilings, great rooms, or southern or western sun exposures - step up to the next BTU size.
up to 5,000
Electronic Touch Pad with Remote Control
Energy Star Rated
High Energy Efficiency with Models up to 9.8 EER
Saving you money when compared to lower EER models.
Easy Removable Condenser Top
That allows for quick and complete cleaning of outdoor coils.
This access for cleaning the outdoor coil enables easy removal of dirt and debris to help lengthen the life of the compressor and other sealed system components.
Six easy access screws and let the cleaning begin!
Not available on competitor models!
Easy Access Slide Out Filter
Has a permanent polypropylene filter mesh that is easy to remove and clean.
Accessory Wall Sleeve:
PBWS01A is a solid-side, heavily insulated metal sleeve.
It includes a stamped aluminum exterior grille with a weather-seal rear enclosure for installation without the chassis.
The sleeve has a solid bottom for complete weather-tight installation.
An optional PBWMFC can be used when a more permanent weather seal is needed for sleeves installed without the chassis.
100% Full Factory Run Test
On all units for high reliability and dependability.
Units start the first time - every time!
4-Way Adjustable Airflow
To allow for cooling or heating to any part of the room.
Designed with guest comfort in mind - providing reliable, quiet operation for years to come.
Chassis Depth Installed with Room Front Cover Attached:
Sleeve Cutout Width:
Maximum Wall Thickness:
Sleeve Cutout Height:
PBWS01A Sleeve Width:
PBWS01A Sleeve Depth:
PBWS01A Sleeve Height:
Approx. Chassis Weight:
Approx. Shipping Weight:
Energy Star Qualified:
Heat Pump (Reverse Cycle)
Adjustable Changeover Thermostat:
Thermostatic Drain Valve:
Circuit Breaker Size:
Power Cord Length:
6.0 ft. with LCDI
U.L. Listed; USA and Canada
Slide-out for easy installation and service accessibility
2 Speeds: High & Low
Yes - Cooling Only; Auto Fan Operation
Yes - High Speed
Top Discharge with 4-way adjustable air throw
Top Pull-out Polypropylene - Permanent filter that is washable
Condensate Drain Spout:
Yes - external drain spout on the PBWS01A optional wall sleeve
Insulated metal sleeve with solid side and bottom with weather board and stamped aluminum grille. Color: Beige
Architectural Grille kit for use with PBWS01A sleeve. Color: Beige
Architectural Grille kit for use with PBWS01A sleeve. Color: Custom Colors
An insulated metal cover for use when PBWS01A is installed without 26" Built-in Air Conditioner
Sleeve Adapter kit; converts Fedders BSAOOC & Friedrich WSC 27" wall sleeves for use with Amana 26" Built-in Air Conditioners.