The #1 Choice in Professional Wall Hoods
The updated Maestrale by Faber is a 18" tall, 25" deep under cabinet wall hood with 1,200 CFM or 600 CFM PRO all metal impellers. With baffle style grease filters, top or direct rear venting, LED lamps, welded, wrapped and polished corners and multiple chimney options, the Maestrale is the most versatile and easy to install PRO hood available.
Faber, Spa is located in Fabriano, Italy and has been producing high quality range hoods for over 50 years, since 1955. Professor Abramo Galassi invented the first Faber vent hood in a small laboratory in Italy and now over 50 years later they are a world leader in ventilation. In Italy, Faber is the market leader; with 50% market share in a country that values premium kitchen ventilation. Faber products show a company wide commitment to technology, quality and design.
The design of Faber range hoods uses the principle coined by the famous American architect Louis Henry Sullivan that, "form follows function". Design is important, but if a range hood does not work properly or provide adequate ventilation for your kitchen, then their customers would not be satisfied.
Faber designs their high quality vent hood appliances knowing that a strong aesthetic impact can be made on the kitchen with ventilation. They know design is important in your decision process, so there are a large number of designs available to choose from depending on your taste. From stainless steel fashion forward vents and contemporary to professional / traditional and classic, Faber has the right design for you!
600 CFM or 1,200 CFM
2.8 - 12.0 Sones
The motor in this hood is surrounded in metal with all metal impellers for top performance.
Adjustable Mounting Hardware
Wall brackets are adjustable once the hood is hung to insure a perfect level installation.
Direct Rear Venting
Vent the ducting up or rotate the blower to the back to avoid extra duct work when on an outside wall.
Baffle Grease Filters
Dishwasher safe stainless steel filters capture grease and allow for easy clean up in the dishwasher.
Universal Make-Up Air Damper (# MUDAMPER6 / MUDAMPER8 / MUDAMPER10)
Satisfies make-up air requirements, this kit uses an air switch to activate the makeup air damper to open and bring fresh air into the home when the hood fan is on. It then closes tightly when the hood is off. CFM is not reduced with this accessory
Ductless Vent Grate Kit (# DUCTGRT36)
A 4" tall stainless steel vent grate which is installed between the hood & the cabinet to recirculate the air back into the kitchen when ducting outside isn't possible. Includes the vent grate, hardware and charcoal filters.
Replacement Charcoal Filter Kit (# FILTER1)
High quality charcoal filter for use when recirculating the air back into the kitchen. Filters out odor and should be replaced every 6 months.
Telescopic Chimney Cover (# TELEMAES)
24 wide, extends to accommodate 8 - 9 foot ceilings
Full Width Duct Cover (# FULL36)
12" high; extends full width of the hood.
CFM Reducer Kit (# CFMRED)
For use in make up air environments where an under 300 CFM hood is required. This kit reduces the ducting to 5" round and reduces the CFM to under 300.
1,200 or 600
2.8 - 12.0 Sones
Slider with LED Indicator
3x LED Lights
Dishwasher Safe Stainless Steel Grease Filter
Pro Motor with Metal Impellers:
Convertible to Ductless:
Make-Up Air Dampers:
# MUDAMPER10, # MUDAMPER6, #MUDAMPER8
Ductless Vent Grate Kit:
Replacement Charcoal Filter Kit:
Telescopic Chimney Cover:
1 x 6" (600 CFM model) round or 2 x 6" Round (1,200 CFM model)