Features CFM Room Circulation: 270 CFM Chassis Type: Slide Out Control Type: Digital Cooling Capacity (BTU): 10,050 BTU Energy Efficiency Rating: 11.3 Heat: No Maximum Cooling Amps: 7.9 Amps Maximum Cooling Watts: 890 Watts PTAC: No Remote Control Included: Yes Type: Window / Wall Wall Sleeve Included: No Window Type: Standard
Technical Details ADA Compliant: No Energy Star Rated: Yes Plug Type: 5-15P Voltage: 115 Volts
Items identified as Quick Ship will ship within 2 business days from our warehouse in Babylon, New York. Actual delivery times will vary based on your location. If you are ordering multiple items and not all items qualify for Quick Ship, the order will ship when all items are available to ship. Quick Ship may not apply to multiple quantities of the same product.
10,050 BTU Room Air Conditioner with 11.3 EER, R-410A Refrigerant, 2.5 Pts/Hr Dehumidification, 4-Way Air Discharge, Digital Thermostat and Remote Control
This item is unavailable at this time but we may have a similar model. Please call 1-877-957-5377 and speak to a sales associate
GE Consumer and Industrial spans the globe as an industry leader in major appliance, lighting and integrated industrial equipment systems and services. They provide solutions for commercial, industrial and residential use in more than 100 countries which uses innovative technologies and "ecomagination." It's a GE initiative to aggressively bring to market new technologies that help customers and consumers meet pressing environmental challenges to deliver comfort, convenience and electrical protection and control. GE brings imagination to work.
Looking For A New GE Air Conditioner
With dozens of ENERGY STAR qualified models, GE wall air conditioners and window air conditioners are among the most energy-efficient air conditioners available. GE thru wall air conditioners offer clean lines, smooth curves and a contemporary design, and are available in a soft, neutral beige.
How to Choose a Room Air Conditioner
Compared to large capacity central units, room air conditioners have several advantages. The initial cost of a room air conditioning unit is significantly lower than the cost of central air. Because room air conditioners are designed for cooling small spaces, operating costs are reduced. And, room air conditioners can provide personalized temperature and humidity controls that central systems cannot.
Calculating Cooling Capacity
Cooling capacity is the critical factor in properly selecting a room air conditioner. Cooling capacity is measured in British Thermal Units (BTUs) and typical models will range in capacity from 5,000 BTUs to 28,500 BTUs.
Choosing an undersized unit will overwork the unit and it will not cool properly. Choosing an over-sized unit will cost more to buy and operate and it will not dehumidify properly.
We can help you to calculate capacity. Be prepared to provide specific information on: Room Dimensions A simple floor plan to show the location of doors and north-facing windows The number of people it will serve Sources of heat such as lamps, TV and appliances An explanation of what's above the intended room Your insulation provisions Cooling Capacity by Room Size
Measure the length and width of the area to be cooled. Multiply the length by the width to determine square footage or square meters. Locate the room size in the chart below to select the appropriate BTUs. Then use the product information to select the unit for your room. When cooling rooms with uninsulated ceilings, great rooms, or southern or western sun exposures - step up to the next BTU size.
up to 5,000
Air Conditioner Tips
Air flow - Keep air filters clean. Do not block air flow areas.
Roomside view - J-models feature concealed power cord storage, this eliminates excessive cord exposure when receptacle is located close to unit.
Wall Opening for RAB46/47/48 Cases
A finished opening of 26 1/8" x 15 3/4", clear of intrusions, is required. Keep clearance of 4" from side walls. Brick veneer or frame walls should have wood studding surrounding case to provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields. NOTE: units should be caulked on all four sides of case to the building exterior to assure building integrity.