From vent hoods that blend into your countertop or cabinet, to canopy vents that can be mounted to a wall or installed above an island, KitchenAid offers ventilation solutions that provide a real choice, in both size and style.
The sleek styling of this wall-mount canopy hood will complement any kitchen whether it is integrated into the design as a focal point, or simply admired for its slim canopy profile, beveled edges, and exceptional performance.
The KWCU465S features a 4-speed pro motor that exhausts up to 600 CFMs, making it powerful enough to handle the requirements of high-powered, commercial-style gas burners. Heavy-duty grease filters remove steam and grease from the air as it is drawn through the hood to maintain a fresh kitchen environment. And because it has four speeds, you can adjust the strength of ventilation power to accommodate your desired cooking method.
The 3 halogen cooktop lights provide increased visibility over the cooking surface and the dual light setting provides options, based on the amount of light your desired cooking method requires. A 3 heavy-duty dishwasher-safe grease filters remove steam and grease from the air as it is drawn through the hood and the 4-speed electronic control, with blue light, provides four speeds with controls that are all located in one place. This unit can also be convertible to recirculating making it possible to install in areas without access to direct venting and chimney extension kits are available for installing the vent hood in an area with a high ceiling.
Pro motor exhausts up to 600 CFM
Multiple speed ventilation control that can exhaust up to 600 CFM to handle the requirements of high-powered gas burners.
Halogen lights over cooking surface
Dishwasher-safe grease filters help remove steam and grease
4-speed electronic touch controls with blue light
Whisper Quiet ventilation system
Convertible to recirculating installation (ductwork not included)
Chimney extension kit
Slim canopy profile
Seamless canopy design with beveled edges
Architect Series II styling with new integrated cast metal badge
31 7/16" min./ 40 7/16" max.
20 Ampere. 120 Volts. 60 Hertz (1/second). USE COPPER WIRE ONLY. GROUNDED CIRCUIT IS REQUIRED. A TIME-DELAY FUSE OR CIRCUIT BREAKER AND SEPARATE CIRCUIT IS RECOMMENDED.
Convertible to Recirculating Installation:
Yes (Optional recirculating kit required)
Duct Type - 3 1/4" x 10" Rectangular:
Duct Type - 6" Round:
Dual Light Setting:
Dishwasher-Safe Grease Filters:
Electronic Touch Controls with Blue Light:
Seamless Canopy Design with Beveled Edges:
Accessories (Part No.)
Recirculating Kit (Ductwork not included) - Stainless Steel:
24" Backsplash - Stainless Steel:
Wire Rack - Chrome:
Hanger Kit for Chrome Wire Rack:
Utensil Bar - 15" Sides:
Utensil Bar - Back:
Chimney Extension Kit - Stainless Steel:
8212710 (Provides approximately 23" of additional canopy height to accommodate high ceilings)