Technical Details ADA Compliant: No Energy Star Rated: Yes Voltage: 230/208 Volts
Items identified as Quick Ship will ship within 2 business days from our warehouse in Babylon, New York. Actual delivery times will vary based on your location. If you are ordering multiple items and not all items qualify for Quick Ship, the order will ship when all items are available to ship. Quick Ship may not apply to multiple quantities of the same product.
22,000 BTU Single Zone Wall-Mount Ductless Split System with 27,600 BTU Heat Pump, 12.5 EER, Inverter and R-410A Refrigerant (LSN240HSV3 Indoor/LSU240HSV3 Outdoor)
LG Duct-Free Split Systems
LG Duct-Free Split systems allow you to cool or heat your entire home or just a single room without the need for invasive ductwork. There's no tearing down of walls or altering your home's appearance. LG Duct-Free Split systems are simple to have installed. In most cases, a professional contractor gets the job done in less than a day.
How LG Duct-Free Split Systems Work
LG Duct-Free Split air-conditioning and heating systems consist of three basic components: An inverter-driven outdoor unit, a stylish and quiet indoor unit that delivers conditioned air to the room, and compact conduit for refrigerant lines and wiring connecting the units. This design allows for energy conservation by targeting only those areas that need cooling or heating, a cost effective feature when only certain portions of a building are being used.
Welcome To LG
LG Electronics USA Commercial Air Conditioning business is a leading player in the global air conditioning market, manufacturing both commercial and residential air conditioners and providing total sustainability and building management solutions. From consumer units to commercial air conditioning systems, LG provides a wide range of innovative products for heating, ventilating and air conditioning.
How To Choose A Room Air Conditioner
Compared to large capacity central units, room air conditioners have several advantages. The initial cost of a room air conditioning unit is significantly lower than the cost of central air. Because room air conditioners are designed for cooling small spaces, operating costs are reduced. And, room air conditioners can provide personalized temperature and humidity controls that central systems cannot.
Calculating Cooling Capacity
Cooling capacity is the critical factor in properly selecting a room air conditioner. Cooling capacity is measured in British Thermal Units (BTUs) and typical models will range in capacity from 5,000 BTUs to 28,500 BTUs.
Choosing an undersized unit will overwork the unit and it will not cool properly. Choosing an over-sized unit will cost more to buy and operate and it will not dehumidify properly.
We can help you to calculate capacity. Be prepared to provide specific information on:
A simple floor plan to show the location of doors and north-facing windows
The number of people it will serve
Sources of heat such as lamps, TV and appliances
An explanation of what's above the intended room
Your insulation provisions
Cooling Capacity by Room Size
Measure the length and width of the area to be cooled. Multiply the length by the width to determine square footage or square meters. Locate the room size in the chart below to select the appropriate BTUs. Then use the product information to select the unit for your room. When cooling rooms with uninsulated ceilings, great rooms, or southern or western sun exposures - step up to the next BTU size.
up to 5,000
Air Conditioner Tips
Air flow - Keep air filters clean. Do not block air flow areas.
Roomside view - J-models feature concealed power cord storage, this eliminates excessive cord exposure when receptacle is located close to unit.
Wall Opening For RAB46/47/48 Cases
A finished opening of 26 1/8" x 15 3/4", clear of intrusions, is required. Keep clearance of 4" from side walls. Brick veneer or frame walls should have wood studding surrounding case to provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields. NOTE: units should be caulked on all four sides of case to the building exterior to assure building integrity.
Inverter (Variable speed compressor).
Gold Fin Anti-corrosion.
Self-cleaning indoor coil.
Jet cool/Jet heat.
4-Way auto swing.
Built-in low ambient standard, down to 14°F (cooling mode).
24-Hour on/off timer.
Condensate sensor connection.
Cooling only function.
3M HAF filter.
Interior Unit Includes
Installation plate and hardware.
Remote control, batteries, holder and holder hardware.
Exterior Unit Includes
Exterior unit has sufficient refrigerant for charging indoor coil and a 24.6' line set.