Technical Details Accepts Sanke Tap: No Amps: 15 Approved for Outdoor Use: No Voltage: 120 Volts
Quick Ship
Close [X]
Items identified as Quick Ship will ship within 2 business days from our warehouse in Babylon, New York. Actual delivery times will vary based on your location. If you are ordering multiple items and not all items qualify for Quick Ship, the order will ship when all items are available to ship. Quick Ship may not apply to multiple quantities of the same product.
Marvel 61HKBSFLL
24" 1/2 Keg Draft Beer Dispenser with Tapping Equipment, CO2 Tank, Full Auto Defrost and Left Hinge Door Opening
MARVEL : 24" Built-in All-Refrigerator with 5.4 cu. ft. Capacity, Adjustable Wire Shelves, Self-Closing Door, ADA Compliant and Right Hinge Door Opening
Looking for the most modern and stylish way to integrate a keg refrigerator your kitchen, den, game room, or garage? The Marvel 61HK is your answer. This unit handles half or quarter kegs, and builds into standard cabinetry without added clearance. Plus- it accepts a custom panel to seamlessly blend in with your existing cabinetry.
Performance
Builds into standard cabinetry without added clearance
Optional casters let you roll it anywhere
Includes draft arm, hoses, CO2 tank and regulator, drip tray
Standard clip-on handle attaches along door frame
May be built-in, free-standing or rolled on optional casters
Leveling legs
Warranty: One year parts and labor. Five years on compressor and sealed system
Operating Tips
A 1/2 barrel standard keg will provide approximately 175 12 oz. glasses of your favorite beer.
The CO2 tank will last approximately 5-6 kegs under normal conditions.
CO2 tanks can be filled at many places. Ask someone at the location where you get the keg about getting the CO2 tank filled
Beer should stay good for 1-2 months as long as it is kept cold and the CO2 pressure is kept on.
Since draft beer is not pasteurized, it must maintain a cold temperature between 38-40 degrees F.
Temperatures above 45 degrees may cause the beer to become sour, skunky and cloudy.
Foamy beer can be caused by many things. Warm spots in the beer line, dirty beer lines and twists or kinks in beer line. Also, let the keg settle for 2-3 hours before tapping it. Too much carbonation in the keg will cause foamy beer.
Dimensions & Weights
Width:
23 7/8"
Overall Depth including Handle:
26 1/4"
Overall Depth excluding Handle:
24 1/8"
Depth excluding Door:
22"
Height at Full Leg Adjustment:
35"
Height at 0" Leg Adjustment:
34 1/4"
Height without Legs Installed:
34"
Toe Kick Height:
3"
Door Swing at 90°:
25 1/2"
Recommended Cutout Width:
24"
Recommended Cutout Depth:
24" min.
Recommended Cutout Height:
34 1/2"
Recommended Clearance Hole Dia. for Beer Line When Mounting Draft Arm to Countertop:
Up to $300 AGA Marvel Installation Mail-In Rebate with the purchase and installation of qualifying AGA Marvel Appliances. Mail in envelopes must be postmarked no late than June 27, 2013.
$50 WITH PURCHASE AND INSTALLATION OF (1) QUALIFYING APPLIANCE
$150 WITH PURCHASE AND INSTALLATION OF (2) QUALIFYING APPLIANCES
$300 WITH PURCHASE AND INSTALLATION OF (3) QUALIFYING APPLIANCES
Refrigeration
Valid: 05/15/13 - 05/27/13 
New Product Feed
