• Easy Open handle.
• Auto-Touch control.
• Easier cooking and cleanup.

• Low-profile design.
• Stainless-steel finish.

Install below an island, peninsula or standard cabinetry or below a wall oven.

• Fits 4 qt. casserole dish.
• Tall enough for a 20-oz. tall coffee cup.
• 1.2 cubic feet; 950 watts.

The Sharp KB6524PSY Stainless Steel Microwave Drawer Oven has been designed to complement the widest range of kitchen styles and appliances. The low-profile design, stainless steel finish, and convenient handle beautifully complement any kitchen.

The KB6524PSY Microwave Drawer Oven allows you to chose a location that works for your lifestyle. Cooking is easier and faster when the Sharp Microwave Drawer Oven is installed adjacent to your food preparation area: in islands, peninsulas or under the counter.

The Sharp KB6524PSY Stainless Steel Microwave Drawer Oven makes cooking and cleaning easier by putting the microwave oven at an accessible height. Easily lift hot foods from the Sharp Microwave Drawer Oven. Stir dishes without removing them. And low sides and a virtual Carousel make cleaning a breeze.

The Microwave Drawer Oven offers plenty of cooking space, with room enough for a 4-quart casserole dish or a 20-oz. beverage from your favorite coffee shop.

ADA (Americans with Disabilities Act) compliant appliances from Sharp Home Appliances can help to make your home accessible to people with disabilities. The Americans with Disabilities Act establishes accessibility guidelines for many products. Sharp offers an array of appliances for the home that meet the requirements for ADA compliance. A touch-control microwave oven placed at counter height provides cooking access for people of various ages and physical abilities.

To be considered ADA compliant, a Sharp microwave oven must meet the following requirements:
• Maximum high forward reach for controls and operating mechanisms is 48 inch maximum low forward reach is 15 inch.
• Controls and operating mechanisms must be operable with one hand and shall not require tight grasping, pinching or twisting of the wrist. The force required to activate controls shall be no more than 5 lbs.