Blaze

Blaze Patio Heaters

1 - 1 of 4

Blaze Patio Heaters at Plesser's Appliances

Blaze patio heaters, available at Plesser's Appliances, extend the usable season on an outdoor patio — which on Long Island is the difference between an outdoor kitchen used four months a year and one used eight. Built in stainless steel for permanent outdoor installation in mounted and freestanding configurations.


Extending the Season
An outdoor kitchen that only works in July and August is an expensive seasonal amenity. Heat added to a patio or covered space makes spring and fall evenings comfortable and pushes the shoulder seasons out meaningfully. For a substantial outdoor build in this climate, heating is what protects the investment in usable days.


Mounted vs. Freestanding
Wall- and ceiling-mounted heaters direct heat down into a defined seating or dining area without occupying floor space, which suits a covered patio or pergola. Freestanding units move where the gathering is and require no installation. Mounted units require structure and rough-in planned in advance; freestanding units do not.


Coverage Area and Placement
Heaters warm the people and surfaces they radiate onto rather than heating open air, so placement determines effectiveness far more than raw output does. A heater aimed at a dining table works; one mounted too high or too far away does not. Ask about the effective coverage area and recommended mounting height for your specific model.


Electric and Gas Configurations
Electric heaters require a dedicated circuit and produce no combustion, making them workable in more enclosed spaces. Gas heaters require supply and produce more heat per unit but need more clearance and ventilation. Which suits the space depends on how enclosed it is — confirm requirements before finalizing the layout.


Clearance, Electrical, and Installation Planning
Heaters require clearance to combustibles, structure capable of carrying a mounted unit, and either a GFCI-protected circuit or gas supply. Mounting height and aim should be set during design rather than adjusted afterward. Talk to the team at Plesser's Appliances about coverage, mounting requirements, and rough-in while the patio structure is still in design.