Fisher Paykel Downdraft Range Hoods

Fisher & Paykel Downdraft Range Hoods at Plesser's Appliances

Fisher & Paykel downdraft ventilation, available at Plesser's Appliances, rises from behind the cooking surface and pulls air downward and out rather than capturing it overhead. It is the solution for an island or a sightline where an overhead hood is not an option, with real trade-offs worth understanding before specifying.

Ventilation Without an Overhead Hood
A downdraft retracts flush when not in use and rises only while cooking, keeping the sightline over an island completely clear. In a kitchen where the cooktop faces a view, sits under a low ceiling, or is part of an open-plan room the client does not want interrupted, this is the practical reason downdraft gets chosen.

Understand the Performance Trade-Off
Physics favors overhead capture, because heat, steam, and grease rise and a hood catches them where they naturally go. A downdraft has to pull that air sideways and down, working against it, and effectiveness drops with tall stockpots and on the far burners. This is a genuine compromise. If an overhead hood is possible, specify one.

Blower Placement and Duct Routing
Downdraft installations duct beneath the floor or through the cabinet base, and that run's diameter, length, and elbow count determine how much rated capacity actually gets delivered. Blowers may be internal or remote, and moving the blower away is the most effective way to reduce noise. Confirm what blower is included.

Matching Capacity to the Cooking Surface
Capacity has to be matched to the cooktop or rangetop it serves. A high-output gas surface may exceed what downdraft can reasonably handle, worth an honest conversation before the island is built rather than after. Ask about the recommended pairing for your specific surface.

Installation and Code Planning
Downdraft requires cabinet space below the cooking surface for the unit and blower, a duct path out of the island, a dedicated circuit, and on high-capacity installations a make-up air system under mechanical code, a contractor scope item rather than an appliance one. Talk to the team at Plesser's Appliances alongside your builder while the island is still in design.