Fisher Paykel Wall Mounted Range Hoods

Fisher & Paykel Wall-Mounted Range Hoods at Plesser's Appliances

Fisher & Paykel wall-mounted range hoods, available at Plesser's Appliances, mount against the wall above the range in a canopy form, the most straightforward and most effective ventilation configuration. Offered in widths matched to Fisher & Paykel ranges and rangetops across the collections.

The Most Effective Configuration
A wall hood captures rising heat, steam, and grease directly above the source, with the wall itself helping contain airflow rather than working against it. That makes wall mounting the most efficient configuration for a given capacity, with no fighting physics as with downdraft and no open-room cross-drafts as with an island. When the layout allows it, this is the right answer.

Sizing to the Cooking Surface
Capacity should be matched to the output of the range or rangetop beneath, and hood width should meet or exceed the cooking surface so capture extends past the outer burners. Undersized ventilation is the most common failure in an otherwise well-specified kitchen. Ask about recommended capacity for your specific unit rather than working from width alone.

Collection-Matched Styling
Wall hoods are offered in widths and finishes that coordinate with Fisher & Paykel ranges and rangetops across Series 7, Series 9, and Professional treatments, so the cooking wall reads as one specified installation rather than an assembled set. Where a custom finish is the intent, a ventilation insert inside a millworker-built enclosure is the alternative route.

Filtration, Lighting, and Blowers
Removable baffle or mesh filters handle grease capture and clean regularly, with LED lighting and multiple fan speeds. Blowers may be internal, in-line, or exterior-mounted, and moving the blower away from the hood is the most effective way to reduce kitchen noise. Confirm what is included versus separately ordered.

Duct Routing, Height, and Code Planning
Duct diameter, run length, and elbow count all reduce delivered capacity, so design for the shortest straightest route out. Mounting height above the cooking surface, clearance, and on high-capacity installations make-up air requirements need settling with your builder before framing. Talk to the team at Plesser's Appliances about hood and blower selection alongside your range decision.