Kitchenaid Gas Cooktops

KitchenAid Gas Cooktops at Plesser's Appliances

KitchenAid gas cooktops, available at Plesser's Appliances, drop into a countertop cutout with cabinetry or drawers below, bringing open-flame control to a surface-only installation. Offered in multiple widths and burner counts with dual-tier burner designs and heavy cast-iron grates.

Professional Dual Tier Burners
Dual-tier burner designs deliver high output for searing and fast boiling, with dedicated melt and simmer settings holding genuinely low heat for chocolate, sauces, and long reductions. Sealed construction keeps spills on the cooktop surface rather than letting them drop into a burner box below. Confirm burner count and output for your width.

Continuous Cast-Iron Grates
Heavy continuous cast-iron grates let cookware slide across the full surface rather than lifting between burners, and they hold heat and resist warping. Grate design affects how the cooktop works with large pans and stockpots more than burner count does — confirm the configuration for your model before ordering.

Cabinetry Freedom Below
Because a cooktop is shallow relative to a rangetop, usable drawers or cabinet space stay available directly beneath it, which is a meaningful gain in a smaller kitchen. It also separates the cooking surface from the oven, so the oven can go into a wall stack at a comfortable height rather than at floor level.

Controls and Ignition
Front-mounted knobs give control feedback you can feel and operate with wet hands, with electronic ignition eliminating pilot lights. Because controls sit at the front of the surface, knob styling is a visible part of the countertop — coordinate with adjacent KitchenAid equipment.

Cutout, Clearance, and Ventilation Planning
Cutout dimensions, countertop overhang, clearance to combustibles, and cabinet depth below vary by model and are not interchangeable between widths. Natural gas and LP configurations differ. Ventilation should be sized to total burner output. Talk to the team at Plesser's Appliances about cutout specs, gas supply, and hood sizing before the countertop is templated.