Kitchenaid Wall Mounted Range Hoods

KitchenAid Wall-Mounted Range Hoods at Plesser's Appliances

KitchenAid wall-mounted range hoods, available at Plesser's Appliances, mount against the wall above the range in a canopy form that replaces the upper cabinet — the most effective ventilation configuration when you can give up the storage. Offered in widths matched to KitchenAid ranges and rangetops.

The Most Effective Configuration
A wall hood captures rising heat, steam, and grease directly above the source, with the wall itself helping contain airflow rather than working against it. That makes wall mounting the most efficient configuration for a given capacity — no fighting physics as with downdraft, no open-room cross-drafts as with an island. When the layout allows it, this is the right answer.

More Capture Than Under-Cabinet
A canopy hood has more capture area and typically higher capacity than an under-cabinet unit of the same width, because the housing is not constrained by cabinet depth. On a high-output KitchenAid gas range or commercial-style rangetop, that difference determines whether grease and odor actually leave the kitchen.

Sizing to the Cooking Surface
Capacity should be matched to the output of the range or rangetop beneath, and hood width should meet or exceed the cooking surface so capture extends past the outer burners. Undersized ventilation shows up as lingering odor and grease film on cabinets. Ask about recommended capacity for your specific unit rather than working from width alone.

Filtration, Lighting, and Blowers
Removable grease filters handle capture and clean regularly, with LED lighting and multiple fan speeds covering simmering through high-heat searing. Blowers may be internal, in-line, or exterior-mounted — moving the blower away from the hood is the most effective way to reduce kitchen noise. Confirm what is included versus separately ordered.

Duct Routing, Height, and Code Planning
Duct diameter, run length, and elbow count all reduce delivered capacity, so design for the shortest straightest route out. Mounting height above the cooking surface, clearance, and on high-capacity installations make-up air requirements need settling with your builder before framing. Talk to the team at Plesser's Appliances about hood and blower selection alongside your range decision, not after it.