
Miele Under The Cabinet Range Hoods
Sort:
Sort:
1 - 1 of 11
Today's Price:
$1,699.00
Rebate Available
Today's Price:
$1,399.00
Rebate Available
Today's Price:
$3,099.00
Rebate Available
Today's Price:
$2,699.00
Rebate Available
Today's Price:
$2,399.00
Rebate Available
Today's Price:
$2,099.00
Rebate Available
Today's Price:
$1,799.00
Rebate Available
Today's Price:
$1,399.00
Rebate Available
Today's Price:
$1,299.00
Rebate Available
Today's Price:
$1,199.00
Rebate Available
Today's Price:
$1,099.00
Rebate Available
Miele Under the Cabinet Range Hoods at Plesser's Appliances
Miele under-cabinet range hoods, available at Plesser's Appliances, mount beneath an existing upper cabinet above the cooking surface, preserving the cabinet run rather than interrupting it.
Ventilation Without Losing the Cabinet
An under-cabinet hood fits into the space beneath a wall cabinet, so the cabinet above stays usable and the run of upper cabinetry remains continuous. In a smaller kitchen where every cabinet counts, that is the deciding factor. It also makes for a lower-profile installation than a canopy hood.
Capacity Relative to a Canopy Hood
Under-cabinet units generally offer less capture area and lower capacity than a wall-mounted canopy of the same width, because the housing has to fit within cabinet depth. On a high-output gas cooktop, that may not be enough, so check honestly against the burner output rather than assuming width determines fit.
Con@ctivity Automatic Control
Con@ctivity links the hood to a Miele cooktop so it turns on, adjusts speed, and runs on after cooking automatically. That is particularly useful on an under-cabinet unit, where controls sit at the front edge and manual operation means reaching over the cooking surface. Confirm compatibility with your specific cooktop.
Ducted or Recirculating
Under-cabinet hoods can typically duct up through the cabinet, out through the back wall, or recirculate through a charcoal filter where ducting is not possible. Ducted always performs better. Confirm which configurations your model supports and what a recirculating kit requires.
Cabinet Depth, Duct Routing, and Installation Planning
Installation requires adequate cabinet depth for the housing, correct mounting height above the cooking surface, a duct path or recirculating kit, and a dedicated circuit. Duct run length and elbow count reduce delivered capacity, so design for the shortest route. Talk to the team at Plesser's Appliances about cabinet dimensions, duct routing, and capacity relative to your cooktop.











