Miele Wall Mounted Range Hoods

Miele Wall-Mounted Range Hoods at Plesser's Appliances

Miele wall-mounted range hoods, available at Plesser's Appliances, mount against the wall above the cooking surface in a canopy form, the most straightforward and most effective ventilation configuration.

The Most Effective Configuration
A wall hood captures rising heat, steam, and grease directly above the source, with the wall itself helping contain airflow rather than working against it. That makes wall mounting the most efficient configuration for a given capacity, with no fighting physics as with downdraft and no open-room cross-drafts as with an island. When the layout allows it, this is the right answer.

Sizing to the Cooking Surface
Capacity should be matched to the output of the cooktop or rangetop beneath, and hood width should meet or exceed the cooking surface so capture extends past the outer burners. Undersized ventilation is the most common failure in an otherwise well-specified kitchen. Ask about recommended capacity for your specific unit rather than working from width alone.

Con@ctivity Automatic Operation
Con@ctivity links the hood to a Miele cooktop so it turns on, adjusts fan speed, and runs on after cooking automatically based on what the cooktop is doing. In practice that means ventilation gets used correctly rather than forgotten. Confirm compatibility between the specific hood and cooktop you are specifying.

Filtration, Lighting, and Noise
Dishwasher-safe grease filters handle capture and clean regularly, with LED lighting and multiple fan speeds. Miele hoods are engineered for low noise at usable speeds, which matters because a hood too loud to run on high gets run on low. Confirm noise ratings alongside capacity figures for your model.

Duct Routing, Height, and Code Planning
Duct diameter, run length, and elbow count all reduce delivered capacity, so design for the shortest straightest route out. Mounting height above the cooking surface, clearance, and on high-capacity installations make-up air requirements need settling with your builder before framing. Talk to the team at Plesser's Appliances about hood and blower selection alongside your cooktop decision.