Wolf Gas Cooktops

Wolf Gas Cooktops at Plesser's Appliances

Wolf gas cooktops, available at Plesser's Appliances, drop into a countertop cutout with cabinetry or drawers below, freeing the oven to be installed at working height elsewhere in the kitchen. Built by Sub-Zero Group in Wisconsin, Wolf gas cooktops bring dual-stacked sealed burner performance to a countertop installation across a range of widths and burner counts.

Dual-Stacked Sealed Burners
Wolf's dual-stacked design uses two tiers of burner ports so a single burner covers everything from high-output searing to a low, stable simmer without cycling. Single-tier burners have to compromise at one end. Sealed burner construction keeps spills on the cooktop surface rather than letting them drop into a burner box below.

Countertop Installation and Cabinetry Freedom
Because a cooktop is shallow relative to a rangetop, you keep usable drawers or cabinet space directly beneath it — a meaningful gain in a smaller kitchen. It also separates the cooking surface from the oven entirely, so the oven can go into a wall stack at a comfortable height instead of at floor level. This is the main practical argument for a cooktop over a range.

Continuous Grates and Cleanup
Grates are designed to let cookware slide across the surface rather than lifting between burners, and they lift out for cleaning. Configuration and grate design vary across widths and series, so confirm the layout on the spec sheet for your model — burner placement matters more than burner count when you regularly use large pans.

Signature Control Styling
Wolf's red control knobs carry through to the cooktop line, with alternate finishes available where red is not the design intent. Because a cooktop's controls sit at the front of the surface rather than on a backguard, knob styling is a visible part of the countertop. Confirm which options apply to your model.

Cutout, Clearance, and Ventilation Planning
Cutout dimensions, countertop overhang, clearance to combustibles, and cabinet depth below all vary by model and are not interchangeable between widths or series. Ventilation should be sized to total burner output rather than chosen after the fact. Talk to the team at Plesser's Appliances about cutout specs, gas supply, and hood sizing before the countertop is templated.