Wolf Induction Cooktops

Wolf Induction Cooktops at Plesser's Appliances

Wolf induction cooktops, available at Plesser's Appliances, install into a countertop cutout as a flat glass surface with no grates or burners to work around. Built by Sub-Zero Group in Wisconsin, they deliver the fastest and most responsive cooking surface Wolf makes, with the easiest cleanup of any configuration in the lineup.

Immediate, Precise Heat Control
Induction puts energy directly into the pan rather than heating air around it, so water boils faster than on gas and a change in setting registers immediately. At the low end it holds a steady temperature without cycling, which makes it genuinely capable at melting, holding, and long simmers. The usable range from high to low is wider than most cooks expect.

Bridge Elements and Zone Flexibility
Bridge elements combine two adjacent zones into one larger cooking area for a griddle, roasting pan, or long fish pan. Element sizes and bridge availability vary by model and width, and some configurations share power across zones — confirm the layout and any power-sharing behavior on the spec sheet before specifying, since it affects what you can run simultaneously.

Flat Surface, Cool Kitchen
A continuous glass surface with no grates or crevices wipes clean in a pass, and because the surface only heats by pan contact, spills do not bake on. Less waste heat also escapes into the room, which is noticeable in a small or poorly ventilated kitchen in summer. Induction still requires ventilation — steam, smoke, and grease do not disappear.

Cookware Requirements
Induction only works with magnetic cookware. A refrigerator magnet that sticks to the pan base is the test; aluminum, copper, and most glass will not work. Anyone switching from gas should plan for replacing part of their cookware, which is a real cost worth accounting for at specification rather than discovering after installation.

Electrical, Cutout, and Clearance Planning
Induction cooktops need dedicated high-amperage 240V service, and this is the most common obstacle in older homes — have an electrician confirm panel capacity before ordering. Cutout dimensions, countertop material compatibility, and required clearance below for ventilation vary by model. Talk to the team at Plesser's Appliances about electrical requirements and cutout specs before the countertop is templated.