I love my hood! It's absolutely beautiful. The company was fantastic to work with and shipping was super fast. I'd give them 10 stars 🌟

Purchased unit with remote blower and short chimney for a low kitchen ceiling over island stove and is working great! Product support was great both during the purchase process and follow up questions. Due to a lower ceiling height and while maintaining room view, I had to modify the installation process. This was due to the fact that if I used both 12" chimney sections I would be 4" lower than the recommended 30" as the "telescoping" minimum is closer to 16" if following normal installation steps. Per instructions, I first determined ceiling bracket location and marked/cut vent hole and predrilled the 4 corner mounting bolt locations, then installed attic ceiling blocking. (Now the installation was modified). The 4 holes were then drilled through the blocking and bracket with 3/8" bit. Once the "attic" was ready, I installed four 3/8" x 4" machine bolts in the ceiling bracket corners in the "up" position and secured in place with nuts on the ceiling side of bracket. The holes in the ceiling "drywall" were also enlarged so the nuts would recess allowing the ceiling bracket to flush up tight. I installed a predetermined length of 8" solid vent pipe since local code (and most others) require non flexible ducting for hoods. I then mounted the ceiling bracket to the hood with the supplied corner brackets though I did have to drill new holes in the brackets for mounting to the hood (as there is an upper and lower bracket). The ceiling bracket lip also needed a slight grinding off of approximately 1/4" or so to match overall chimney length (11 3'4") from hood to top of ceiling bracket. One short chimney was now installed down over the ceiling bracket with the top matching overall height to flush out to the ceiling. Two friends easily lifted the hood assembly guiding the vent pipe and 3/8" bolts through the ceiling holes which I (in the attic) tightened up the nuts with washers with an impact tool. The kitchen side was now complete! Installing the remote blower onto the preinstalled vent pipe and through the roof was easily completed. I would feel very comfortable purchasing and installing this system again! And now my gal doesn't complain of cooking smells in the back of the house!!

This sample was very helpful in selecting the correct shade of red to match my kitchen. I bought the dishwasher and 48" range. Without the sample I would have easily selected the wrong shade.