Aga Range Hoods

AGA Range Hoods at Plesser's Appliances

AGA range hoods, available at Plesser's Appliances, are designed to match the brand's ranges and cooktops in width, styling, and enamel or stainless finish — which matters more here than with most hoods, since a mismatched hood over a cream or claret AGA undoes the whole effect.

Designed to Match the Range
The hood is the second most visible appliance on a cooking wall, and on an AGA installation it is the piece most likely to break the composition. AGA hoods carry the brand's finish and styling program so the pair can be specified as one unit. Coordinate width, height, finish, and trim across both at order.

Sizing Capacity to the Cooking Surface
Hood capacity should be matched to the output of the range or rangetop below, and hood width should meet or exceed the cooking surface so capture extends past the outer burners. Undersized ventilation shows up as lingering odor and grease film on cabinets. Ask about recommended capacity for your specific cooking surface rather than working from width alone.

Wall and Canopy Configurations
Wall-mounted canopy hoods sit against the wall above the range and offer the most capture area, replacing the upper cabinet. Lower-profile configurations suit kitchens where ceiling height or sightlines are constrained. A tall canopy in a low-ceilinged room dominates the space — worth considering against the room, not just the range.

Filtration, Lighting, and Blowers
Removable grease filters handle capture and clean regularly, with lighting illuminating the cooking surface and multiple fan speeds covering simmering through high-heat searing. Blowers may be internal, in-line, or exterior-mounted, and moving the blower away from the hood is the most effective way to reduce kitchen noise. Confirm what is included versus separately ordered.

Duct Routing, Height, and Installation Planning
Duct diameter, run length, and elbow count all reduce delivered capacity, so design for the shortest straight route out. Mounting height above the cooking surface, clearance, and on high-capacity installations make-up air requirements need settling with your builder before framing. Talk to the team at Plesser's Appliances about hood and range selection together, alongside finish and lead times.