GE Range Hoods

GE Range Hoods at Plesser's Appliances

GE range hoods, available at Plesser's Appliances, cover wall-mounted, island, under-cabinet, insert, and downdraft configurations across the GE and GE Profile lines. Built by GE Appliances in the United States, they are designed to pair with GE ranges and cooktops.

Sizing Capacity to the Cooking Surface
Hood capacity should be matched to the output of the range or cooktop below, and hood width should meet or exceed the cooking surface so capture extends past the outer burners. Undersized ventilation shows up as lingering odor and grease film on cabinets. Ask about recommended capacity for your specific cooking surface rather than working from width alone.

Chef Connect Automatic Operation
Chef Connect syncs a compatible GE hood with a GE range so the hood light and fan turn on automatically when a surface burner is lit. In practice that means ventilation actually gets used rather than forgotten. Confirm compatibility between the specific hood and range you are specifying.

Five Configurations for Five Layouts
Wall-mounted canopy hoods sit against a wall with the most capture area. Island hoods mount from the ceiling, finished on all sides. Under-cabinet models preserve the storage above. Inserts install inside a custom enclosure. Downdraft rises beside the cooktop where nothing can hang overhead. The layout dictates the configuration.

Filtration, Lighting, and Noise
Removable grease filters clean in a dishwasher on most models, with LED lighting and multiple fan speeds. Baffle filters where offered are more effective and easier to maintain than mesh. Confirm filter type and noise ratings alongside capacity, since a hood too loud to run on high gets run on low.

Duct Routing, Blowers, and Installation Planning
Duct diameter, run length, and elbow count all reduce delivered capacity, so design for the shortest straight route. Confirm what blower is included. Mounting height and, on high-capacity installations, make-up air requirements need settling with your builder before framing. Talk to the team at Plesser's Appliances about hood and range selection together.