Zline Range Hoods

ZLINE Range Hoods at Plesser's Appliances

ZLINE range hoods, available at Plesser's Appliances, are one of the brand's deepest categories, spanning wall-mounted, island, under-cabinet, and insert configurations in a wide range of widths, capacities, and finish options.

Breadth of Styling Options
ZLINE offers hoods in more shapes, materials, and finishes than almost any other brand at this price, including stainless, DuraSnow, black stainless, hand-hammered copper, wood, and designer shells. If the hood is meant to be a visible design element in an open kitchen, that range of choice is the practical reason to look here.

Sizing Capacity to the Cooking Surface
Hood capacity must be matched to the output of the range or cooktop below, and hood width should meet or exceed the cooking surface so capture extends past the outer burners. Undersized ventilation shows up as lingering odor and grease film on cabinets. Ask about recommended capacity for your specific cooking surface rather than working from width alone.

Four Configurations for Four Layouts
Wall-mounted canopy hoods sit against a wall with the most capture area. Island hoods mount from the ceiling, finished on all sides. Under-cabinet models preserve the storage above. Inserts install inside a custom enclosure built by your millworker. The layout dictates the configuration.

Filtration, Lighting, and Noise
Stainless baffle filters handle grease capture and are dishwasher-safe on most models, with LED lighting and multiple fan speeds. Baffle filters are more effective and easier to maintain than mesh. Confirm filter type and noise ratings alongside capacity, since a hood too loud to run on high gets run on low.

Duct Routing, Blowers, and Installation Planning
Duct diameter, run length, and elbow count all reduce delivered capacity, so design for the shortest straight route. Blower options and whether a blower ships with the hood vary, so confirm what is included. Mounting height and, on high-capacity installations, make-up air requirements need settling with your builder before framing. Talk to the team at Plesser's Appliances about hood and range selection together.